Quick Connect Couplings & Stainless Steel Tubing

Our extensive range of easy to install Quick Connect Couplings are manufactured keeping into attention every detail of functional variations. These are exported to a large number of industries across the globe. We hold the capabilities to engineer products as per our client's specifications & requirements.

Type AVDV
Double valve series couplings, both halves female threaded having valves which operate on the opposed poppet valve principle, valve consists of a spring loaded seat seal with attached valve. A quick pull on the sleeve and the assembly is disconnected, pull again, push the adapter in coupler half and the unit is connected.

Double valve self sealing couplings seal off at both ends when disconnected is not completely dry, a few CCS of fluid being spilled.

Type AVSV
Single valve series couplings, Coupler consists of a spring loaded seat seal with attached valve and adapter without valve. A quick pull on the sleeve and the assembly is disconnected to connect again push the adapter without touching coupler sleeve and the unit is connected. It is also ideal for pneumatic tools, air and water piping.

Type AVST
Through type series couplings, Coupler & Adapter both halves does not have valve mechanism. This one has a full flow straight through capacity because it is without valves. To disconnect pull the sleeve as well as the adapter and to connect again pull the sleeve and push the adapter.

Operation
The sliding sleeve on the coupler is pulled back, the adapter is inserted, then the sleeve is pushed forward to make the connection. The seal is made by poppet valves in each component, which close during the disconnection cycle.

Specification
All our Quick Release couplings are in accordance with our manufacturing standard and generally not interchangeable with other couplings manufacturers.

Thread of Coupling
All the quick Release couplings are available in BSP/NPT standards (Male or Female). Other threading can be manufactured if required as per your standard.

At A Glance
AVI has been the confident supplier of AVLOK™ and quick disconnect couplings to various industries. AVI Quick disconnect couplings are standard for on various Hose application which needed frequent take down and service. This advantage plus proven reliability make AVLOK™ Quick disconnect couplings THE MARKET LEADER.

R & D has always been and continues to be an important activity of AVLOK™. Many other developments and product variations result in the most complete line of House connections for the largest variety of fluids and applications offered by any other manufacturer.

SIZES AND TYPES OTHER THAN THOSE MENTIONED HERE ARE AVAILABLE ON REQUEST.

Seamless / ERW Stainless Steel Pipes are extensively used for conveyance of fluids intended for critical high temperature and general. Seamless Stainless Steel Tubes are used in under similar service conditions in heat transfer process equipments like boilers, super heaters, heat exchangers, condensers etc.

User Industries : Chemicals, Fats & Fertilizers, Sugar Mills and Distilleries, Cement Industries, Ship Builders, Paper Industries, Pumps, Petrochemicals, Oil and Natural Gas Organization in terms of the specific materials, Technology, Finance & Personal.

Product Range : The following table represents size range, product standards and material grades of Seamless Stainless Steel Pipe and Tubes: